1. Maintenance of the main crushing machine: The thickness after crushing is determined by the mesh size of the bottom screen. The thicker the copper wire, the larger the mesh should be, and high-pressure butter should be added to damaged machine bearings three times a month. Blades should be sharpened when they become worn.
2. Maintenance of the unloader: When the environmentally friendly dry copper rice machine unloader is powered on, press the green touch screen of the inverter on the electrical cabinet to open it, and then roll the rotating ball. The dry powder miscellaneous wire copper rice machine factory will appear on the display screen. The discharging speed figure appears and is adjusted to the appropriate discharging speed according to the actual production conditions.
3. Maintenance of the separator: The separator must be placed stably and level. Stability means that the whole machine does not shake when the machine is operating, and level means that the material flowing out of the copper port and the leather outlet is evenly distributed left and right. Assuming that one side discharges more material and the other side discharges less material, the side with more material should be raised higher. The higher the front and rear angle of the separation machine, the slower the oscillation speed and the greater the blowing volume, the higher the copper content. It is not easy to discharge to the copper outlet.